linux 하드 제조사 확인 smartctl -i /dev/sda

linux  하드 제조사 확인  smartctl -i /dev/sda

==============================================

yum -y   install    smartmontools 

lsmod | grep -E "cciss|hpsa"

hpsa                   94845  5

scsi_transport_sas     41224  1 hpsa

[root@www dev]# smartctl -a -d cciss,0 /dev/sda

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.el7.x86_64] (local build)

Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===

Device Model:     Samsung SSD 870 EVO 500GB

Serial Number:    S6R0NZ0W500691T

LU WWN Device Id: 5 002538 fc35002b3

Firmware Version: SVT02B6Q

User Capacity:    500,107,862,016 bytes [500 GB]

Sector Size:      512 bytes logical/physical

Rotation Rate:    Solid State Device

Form Factor:      2.5 inches

Device is:        Not in smartctl database [for details use: -P showall]

ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5

SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)

Local Time is:    Mon Nov 24 12:31:57 2025 KST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART Status not supported: Incomplete response, ATA output registers missing

SMART overall-health self-assessment test result: PASSED

Warning: This result is based on an Attribute check.

General SMART Values:

Offline data collection status:  (0x00) Offline data collection activity

                                        was never started.

                                        Auto Offline Data Collection: Disabled.

Self-test execution status:      (   0) The previous self-test routine completed

                                        without error or no self-test has ever

                                        been run.

Total time to complete Offline

data collection:                (    0) seconds.

Offline data collection

capabilities:                    (0x53) SMART execute Offline immediate.

                                        Auto Offline data collection on/off support.

                                        Suspend Offline collection upon new

                                        command.

                                        No Offline surface scan supported.

                                        Self-test supported.

                                        No Conveyance Self-test supported.

                                        Selective Self-test supported.

SMART capabilities:            (0x0003) Saves SMART data before entering

                                        power-saving mode.

                                        Supports SMART auto save timer.

Error logging capability:        (0x01) Error logging supported.

                                        General Purpose Logging supported.

Short self-test routine

recommended polling time:        (   2) minutes.

Extended self-test routine

recommended polling time:        (  85) minutes.

SCT capabilities:              (0x003d) SCT Status supported.

                                        SCT Error Recovery Control supported.

                                        SCT Feature Control supported.

                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0

  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       18048

 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       7

177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail  Always       -       8

179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0

181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0

182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0

183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0

187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0

190 Airflow_Temperature_Cel 0x0032   064   055   000    Old_age   Always       -       36

195 Hardware_ECC_Recovered  0x001a   200   200   000    Old_age   Always       -       0

199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       0

235 Unknown_Attribute       0x0012   099   099   000    Old_age   Always       -       5

241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       11956784184

252 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       2

SMART Error Log Version: 1

No Errors Logged

SMART Self-test log structure revision number 1

No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1

 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

  256        0    65535  Read_scanning was never started

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.