ethtool eth0

ethtool eth0

Settings for eth0:

        Supported ports: [ TP ]

        Supported link modes:   10baseT/Half 10baseT/Full

                                100baseT/Half 100baseT/Full

                                1000baseT/Full

        Supported pause frame use: No

        Supports auto-negotiation: Yes

        Advertised link modes:  10baseT/Half 10baseT/Full

                                100baseT/Half 100baseT/Full

                                1000baseT/Full

        Advertised pause frame use: No

        Advertised auto-negotiation: Yes

        Speed: 10Mb/s

        Duplex: Half

        Port: Twisted Pair

        PHYAD: 1

        Transceiver: internal

        Auto-negotiation: on

        MDI-X: on (auto)

        Supports Wake-on: pumbg

        Wake-on: d

        Current message level: 0x00000007 (7)

                               drv probe link

        Link detected: yes

===================================================

ethtool -s eth0 speed 1000 duplex full autoneg off

====================================================

  ethtool eth0

Settings for eth0:

        Supported ports: [ TP ]

        Supported link modes:   10baseT/Half 10baseT/Full

                                100baseT/Half 100baseT/Full

                                1000baseT/Full

        Supported pause frame use: No

        Supports auto-negotiation: Yes

        Advertised link modes:  1000baseT/Full

        Advertised pause frame use: No

        Advertised auto-negotiation: Yes

        Speed: 1000Mb/s

        Duplex: Full

        Port: Twisted Pair

        PHYAD: 1

        Transceiver: internal

        Auto-negotiation: on

        MDI-X: on (auto)

        Supports Wake-on: pumbg

        Wake-on: d

        Current message level: 0x00000007 (7)

                               drv probe link

        Link detected: yes